YHC 300 IG - Impact Resistant and Blast Mitigation Inside Glazed Curtain Wall System

YHC 300 IG - Impact Resistant and Blast Mitigation Inside Glazed Curtain Wall System
YHC 300 IG - Impact Resistant and Blast Mitigation Inside Glazed Curtain Wall System
YHC 300 IG - Impact Resistant and Blast Mitigation Inside Glazed Curtain Wall System
YHC 300 IG - Impact Resistant and Blast Mitigation Inside Glazed Curtain Wall System thumb
YHC 300 IG - Impact Resistant and Blast Mitigation Inside Glazed Curtain Wall System thumb
YHC 300 IG - Impact Resistant and Blast Mitigation Inside Glazed Curtain Wall System thumb
Category: Curtain Walls

YHC 300 IG (Inside Glazed) is a high performance curtain wall system designed and tested to meet the most demanding conditions. With varied infill and components, YHC 300 IG can meet the requirements for Impact Resistance, Blast Mitigation or both.

The system features a 3” wide face dimension to permit the glass engagement necessary for higher design pressures and accommodates 1/4” to 9/16” single glazing or 1” to 1-5/16” insulated glazing.

Read More

Product Data

Features

Hurricane Mitigation / Blast Mitigation / Non Thermal

Benefits

  • Large & Small Missile
    • Small Missile is Dry Glazed
    • Large Missile is Wet Glazed
  • ASTM E 1886 / 1996, TAS 201 – 203
    • Tested to +/- 120 psf *
    • Florida State-Wide Product Approval
  • Blast Mitigation
    • YHC 300 IG meets UFC 4-010-01 prescriptive standard in accordance with 2007 revisions.
    • Model 35H – “Low Hazard” per ASTM F 1642 Test @ 6 psi / 41psi-ms
  • Model 35H Single Doors up to 4’–0” x 8’–0”
  • Model 35H Pairs up to 8’-0” x 8’-0”

*Contact YKK AP Engineering for Job Specific Wind Load analysis at higher levels.

Data

Construction Use: New / Retrofit

Sightline: 3"

Mullion Depth: Using Monolithic Glass Infill: 7-1/16" │ Using Insulating Glass Infill: 7-13/16"

Framing Installation Method: Shear Block

Glazing Installation: Inside / Structural

Glass Type: Monolithic / Insulating

Glass Configuration: Front

Product Line

Anodized Plus® / ProTek®